Command List

Loads and initialises BaCAD for the current profile

Unloads BaCAD for the current profile

Shows all palettes (control panel)

Hides all palettes (control panel)

Loads the BaCAD environment (ribbons, toolbars, profile, etc.)

Unloads the BaCAD environment (ribbons, toolbars, profile, etc.)

Loads an application (module) identified by its unique number

Loads BaCAD Core module

Loads BaCAD Utility module

Loads BaCAD Formwork module

Loads BaCAD Rebar module

Loads BaCAD JunctionCage module

Loads BaCAD Oldies module

Unloads an application (module) identified by its unique number

Unloads BaCAD Utility module

Unloads BaCAD Formwork module

Unloads BaCAD Rebar module

Unloads BaCAD JunctionCage module

Unloads BaCAD Oldies module

Displays BaCAD online help

Displays BaCAD product information (version)

Launches diagnostic process for current drawing (detects eventual data integrity failure)

Refreshes the data cache

Shows the documents palette of the current projet

Regenerates the content of the steel lists linked to the drawing

Creates a new version of a drawing file with all custom BaCAD objects exploded into basic objects. The new version of the drawing loses the intelligence of the custom BaCAD objects, but the resulting basic objects can be displayed and accessed in earlier product versions when object enablers are not available.

Changes the drawing scale and unit

Opens a 2D curve

Closes a 2D curve

Edits a 2D curve

Creates a 2D curve depending on the type and properties of the selected 2D curve

Combines multiple 2D curves into one 2D curve

Divides a 2D curve into serveral 2D

Reverses the direction of a 2D curve

Smooth the vertices of a 2D curve

Sharpens the vertices of a 2D curve

Converts a 2D curve into a polyline

Modifies the axis of a 2D curve

Creates construction lines for annotative 2D curves (like rocks and concrete stops)

Converts a 2D shape

Swaps the alignment point of a 2D shape (opening or column) without moving

Converts a drawing created with CadArm to BaCAD

Converts a drawing created with Baucad to BaCAD

Synchronizes current scale and view with a view

Regenerates all elements relative to the view

Sets the position of a view

Removes a view

Creates a detail view

Creates a detail view

Creates an elevation view

Creates an elevation view

Creates a section view

Creates a section view

Adds a step to a section view

Removes all steps of a section view

Edits parameters of BaCAD Utility module

Shows the palette of Utility module

Initialises a symbol and executes the associated command

Initialises a layer symbol and executes the associated command

Initialises a text style symbol and executes the associated command

Initialises a hatch symbol and executes the associated command

Applies a symbol to entities

Applies a layer symbol to entities

Applies a text style symbol to entities

Applies a hatch symbol to entities

Initializes a symbol determined by its unique identifier

Executes the command of the symbol determined by its unique identifier

Inserts the block of the symbol determined by its unique identifier

Opens styles manager window

Initialises a dimension style from the styles manager

Applies a dimension style to entities

Initialises a multileader style from the styles manager

Applies a multileader style to entities

Defines the display order by entity types or layers

Applies default stored display order

Changes the layer entities according to the criteria

Creates a linear dimension

Creates aligned linear dimension

Creates an angular dimension

Creates an arc length dimension

Creates a radius dimension for a circle or an arc

Creates a diameter dimension for a circle or an arc

Creates linear dimensions

Creates aligned linear dimensions

Creates a main dimension on existing dimensions

Creates through dimension

Merges multiple dimensions in one

Divides a dimension at the specified point

Reverses dimensions in the opposite direction

Adds the DIN format to the dimensions

Removes the DIN format of the dimensions

Removes all DIN format overrides of the dimensions

Edits the DIN format parameters of the dimensions

Creates a model viewport for the specified scale or converts existing polylines

Synchronizes current scale and view with a model viewport

Modifies the scale of a model viewport

Exports model viewports into a paper space layout

Turns on model viewports dynamic links with paper space

Turns off model viewports dynamic links with paper space

Resizes a model viewport

Creates a dynamic level

Creates a dynamic level

Modifies a dynamic level

Opens an edit session in-place for the dynamic level

Displays the properties of a dynamic level point

Removes a dynamic level overrides

Splits a dynamic level into two entities

Merges dynamic levels (with same reference) into a single entity

Creates a level depending on the type and properties of the selected level

Creates a cartridge in paper space

Makes entities annotative (texts, dimensions or hatchs)

Removes the annotativity to entities

Sets linetype scale of a line by defining a value in mm/plt

Selects all entities from one or more layers

Creates a QR code

Creates a glyph

Edits parameters of BaCAD Formwork module

Creates a concrete stop polyline or converts existing polylines

Modifies a concrete stop

Creates a rock polyline or converts existing polylines

Modifies a rock

Creates a sheet pile polyline or converts existing polylines

Modifies a sheet pile

Creates a column

Creates an opening

Creates a clothoïd

Draws information of a clothoïd (start deposit, end circle center and end tangent)

Creates kilometers lines (for clothoïds, lines, arcs, polylines, splines)

Creates an insulation polyline or converts existing polylines

Modifies an insulation

Creates a tightness polyline or converts existing polylines

Modifies a tightness

Creates a grading along a polyline, with or without selection of the low-grading

Reverses the barbules of a grading

Imports points (with their characteristics or attributes) from a file (CSV format)

Locates blocks with attributes and exports them to a file (CSV format)

Creates a sectional steel in the desired view (section, from above, from below, left ou right)

Creates an axis grid lines for steel profiles

Creates axis grid lines

Creates a ground model (contour lines and triangulation)

Creates a ground section by selecting contour lines

Exports surfaces or volumes to a file (CSV format)

Edits parameters of BaCAD Formwork module

Shows the palette of Rebar module

Shows the palette of Weldmesh module

Allows to modify the project linked to the rebar positions

Adds a label to a rebar element

Removes the labels linked to reinforcement elements

Creates one or many thresholds to align rebar labels by converting selected entities (polylines, lines, arcs, ...) or defining a rectangle with two points

Enables one or many thresholds to align rebar labels

Disables one or many thresholds to align rebar labels

Enables one or many thresholds only to align rebar labels

Enables all thresholds to align rebar labels

Disables all thresholds to align rebar labels

Aligns rebar labels to threshold

Automatically adds labels to several reinforcement elements

Allows to modify the layouts linked to the rebar positions

Migrates the reinforcement positions created with earlier than 2017 BaCAD version

Allows to modify the level linked to the rebar positions

Reinforces a rectangular or parellelogram plane zone

Adds an instance of a reinforcement bar in a plane zone

Reinforces a rectangular or parallelogram plane zone with the selected bar properties

Adds a zone with similar bars to the ones of the selected zone and connect it to the selected zone

Adds a zone with similar bars to the ones of the selected zone and connect it to the selected zone

Reinforces a plane zone of any shape

Adds a helix position in a column or a stake

Adds a reinforcement bar in the selected plane zone

Places reinforcement along a trajectory by selecting an entity or picking points

Creates a set of positions and counts it several times

Places parallel or perpendicular reinforcement to the edges of an element (slab, wall, ...) or an opening as well as edges reinforcment

Places parallel or perpendicular reinforcement to the edges of an element (slab, wall, ...) or an opening

Regenarates the chaining

Edits a chaining

Reverse a chaining

Cleans a chaining

Semi-automatically reinforces an isolated foundation

Regenerates a foundation

Edits a foundation

Cleans a foundation

Creates a schema from a reinforced foundation

Creates a wall foundation

Regenerates a wall foundation

Edits a wall foundation

Cleans a wall foundation

Creates a schema from a reinforced wall foundation

Reset reinforcement

Semi-automatically reinforces a column

Regenerates a column

Edits a column

Cleans a column

Creates a schema from a reinforced column

Semi-automatically reinforces a wall

Regenerates a wall

Edits a wall

Cleans a wall

Wall Profile Top

Wall Profile Bottom

Creates a schema from a reinforced wall

Add a door

Add a window

Add a hole

Add a notch

Add a separator

Copy Element

Display wall layer

Hide all wall layers

Display layer vertical interior

Display layer horizontal interior

Display layer horizontal exterior

Display layer vertical exterior

Show all elevations

Hide all elevations

Edits a zone of the wall

Align all the elevations of the wall

Semi-automatically reinforces a radial zone

Regenerates a radial zone

Edits a radial zone

Cleans a radial zone

Creates a schema from a radial zone

Semi-automatically reinforces a section profile

Add section points

Select the segments of the bar

Regenerates a section

Cleans a section

Select a formwork segment exposure value

Pick a bar division point

Switch to the next division variant

Places reinforcement parallel or perpendicular to the cutting plane

Adds an instance of a reinforcement bar in section

Reinforces a parallel or perpendicular to the cutting plane zone with the selected bar properties

Converts an existing polyline to a reinforcement bar

Change section depth

Places a reinforcement label that defines a bar without graphic representation

References the selected reinforcement bar by placing a reinforcement label without graphic representation

Connects the distribution lines having identical reinforcement bars

Removes the connection between distribution lines having identical reinforcement bars

Divides a distribution line in two

Merges distributions line

Alternates the reinforcment bars placement on the distribution line (øX s=Y becomes øX1 s=2*Y + øX2 s=2*Y) or delete the alternate placement of an alternate position

Adds a reinforcement bar on an existing distribution line

Separate all reinforcement bars on a distribution line

Removes a reinforcement bar from a distribution line containing several

Moves a reinforcement bar's distribution line

Edits a reinforcement bar's properties

Edits Rebar Field Bars

Edits Rebar Field Bars

Represents a reinforcement bar in the form of AutoCAD Polyline

Moves the reinforcement bar or the superimposed distribution line, in case of a detected superposition

Replaces the graphic representation of a bar by an AutoCAD primitive (Polyline, Line, ...)

Resets rebar field graphical modification

Extends a reinforcement bar or a distribution line

Shrinks a reinforcment bar or a distribution line

Cuts reinforcement bars on a point or in equal parts

Applys a slope to plane reinforcement zones

Export reinforcement bars

Export reinforcement bars

Selects all linked positions of reinforcement positions

Unlocks a reinforcement field to allow modifications

Locks a reinforcement field to avoid modifications

Aligns the distribution line and the bar of a reinforcement field on the grid

Copies the properties of an existing rebar position to other positions

Copies the rebar style overrides of a position to other positions

Edits the rebar style overrides of one or several positions

Resets the rebar style overrides of one or several positions

Edits the distribution line of a reinforcement bar

Creates anchorages dimensions

Semi-automatically reinforces a slab or foundation

Edits a reinforced slab

Creates a welded wired mesh

Creates an instance of a welded wired mesh

Creates a welded wired mesh in section

Creates an instance of a welded wired mesh in section

Sets the section position and cutting depth of a welded wired mesh

Creates a welded wired meshes in section on an entity

Unlock a welded wired mesh to allow modifications

Creates a zone of welded wired meshes

Creates a zone of welded wired meshes in section

Regenerates a zone of welded wired meshes

Defines the cutting of a welded wired mesh

Removes all the cutouts of a welded wired mesh

Defines a bending of a welded wired mesh

Removes all the folds of a welded wired mesh

Copies welded wire meshes by dragging them

Selects all instances (representations) of a reinforcement position or a welded wire mesh plate

Selects similar positions of a reinforcement positions or a welded wire mesh plates

Opens an edit session in-place for the welded wire mesh

Shows the palette of JunctionCage module

Creates a junction cage in section

Creates a junction cage in plan

Creates a junction cage and links to an existing one

Generates the print list of junction cages

Migrate old block levels to new dynamic levels

Migrate old entities/objects