Liste des commandes

Module ContextualRibbons

Module Quads

Module RxLoader

BACADLoad BaCAD
Loads and initialises BaCAD for the current profile
-BACADUnload BaCAD
Unloads BaCAD for the current profile

Module RxCore

HLP_PALETTES_SHOWShow Palettes
Shows all palettes (control panel)
HLP_PALETTES_HIDEHide Palettes
Hides all palettes (control panel)
HLP_ENV_LOADLoad Environment
Loads the BaCAD environment (ribbons, toolbars, profile, etc.)
HLP_ENV_UNLOADUnload Environment
Unloads the BaCAD environment (ribbons, toolbars, profile, etc.)
HLP_APP_LOADLoad Application
Loads an application (module) identified by its unique number
Loads BaCAD Core module
HLP_APP_LOAD;2Load Utility
Loads BaCAD Utility module
HLP_APP_LOAD;3Load Formwork
Loads BaCAD Formwork module
HLP_APP_LOAD;4Load Rebar
Loads BaCAD Rebar module
HLP_APP_LOAD;6Load JunctionCage
Loads BaCAD JunctionCage module
HLP_APP_LOAD;8Load Oldies
Loads BaCAD Oldies module
HLP_APP_UNLOADUnload Application
Unloads an application (module) identified by its unique number
HLP_APP_UNLOAD;2Unload Utility
Unloads BaCAD Utility module
HLP_APP_UNLOAD;3Unload Formwork
Unloads BaCAD Formwork module
HLP_APP_UNLOAD;4Unload Rebar
Unloads BaCAD Rebar module
HLP_APP_UNLOAD;6Unload JunctionCage
Unloads BaCAD JunctionCage module
HLP_APP_UNLOAD;8Unload Oldies
Unloads BaCAD Oldies module
HLP_HELPBaCAD Help
Displays BaCAD online help
HLP_ABOUTBaCAD Version
Displays BaCAD product information (version)
Alias : BACADVER
HLP_DIAGNOSTICDiagnostic
Launches diagnostic process for current drawing (detects eventual data integrity failure)
HLP_CACHE_REFRESHRefresh Cache
Refreshes the data cache
HLP_DOCUMENTS_SHOWShow Documents
Shows the documents palette of the current projet
HLP_STEELLIST_EXTRACTExtract Positions
Regenerates the content of the steel lists linked to the drawing
HLP_EXPORTTOAUTOCADExport to AutoCAD
Creates a new version of a drawing file with all custom BaCAD objects exploded into basic objects. The new version of the drawing loses the intelligence of the custom BaCAD objects, but the resulting basic objects can be displayed and accessed in earlier product versions when object enablers are not available.
HLPN_SCALEUNITChange Scale and Unit
Changes the drawing scale and unit
HLPN_CURVE2D_OPENOpen 2D Curve
Opens a 2D curve
HLPN_CURVE2D_CLOSEClose 2D Curve
Closes a 2D curve
HLPN_CURVE2D_EDITEdit 2D Curve
Edits a 2D curve
Creates a 2D curve depending on the type and properties of the selected 2D curve
HLPN_CURVE2D_JOINJoin 2D Curves
Combines multiple 2D curves into one 2D curve
HLPN_CURVE2D_DIVIDEDivide 2D Curve
Divides a 2D curve into serveral 2D
HLPN_CURVE2D_REVERSEReverse 2D Curve
Reverses the direction of a 2D curve
HLPN_CURVE2D_SMOOTHSmooth 2D Curve
Smooth the vertices of a 2D curve
HLPN_CURVE2D_SHARPENSharpen 2D Curve
Sharpens the vertices of a 2D curve
HLPN_CURVE2D_2POLYLINE2D Curve To Polyline
Converts a 2D curve into a polyline
HLPN_CURVE2D_AXIS2D Curve Axis
Modifies the axis of a 2D curve
HLPN_CURVE2D_CONSTRUCTIONLINECreate construction lines
Creates construction lines for annotative 2D curves (like rocks and concrete stops)
HLPN_SHAPE2D_CONVERTConvert 2D Shape
Converts a 2D shape
HLPN_SHAPE2D_SWAPALIGNMENTSwap 2D Shape Alignment
Swaps the alignment point of a 2D shape (opening or column) without moving
HLPN_CADARM_CONVERTConvert CadArm
Converts a drawing created with CadArm to BaCAD
HLPN_BAUCAD_CONVERTConvert Baucad
Converts a drawing created with Baucad to BaCAD
HLPN_BIM_SELECTSelect Bim
Selects a BIM element as current to link all the next rebar positions created
HLPN_BIM_LINKLink with Bim
Links rebar positions with a BIM element (the BIM element becomes host of the rebar positions)
Moves BIM entities
HLP_VIEW_SELECTSelect View
Synchronizes current scale and view with a view
HLP_VIEW_REGENRegen View
Regenerates all elements relative to the view
HLP_VIEW_SETSet View
Sets the position of a view
HLP_VIEW_REMOVERemove View
Removes a view
HLP_DETAILVIEWDetail View
Creates a detail view
Creates a detail view
HLP_ELEVATIONVIEWElevation View
Creates an elevation view
Creates an elevation view
HLP_SECTIONVIEWSection View
Creates a section view
Creates a section view
HLP_SECTIONVIEW_STEP_ADDSection View Step
Adds a step to a section view
HLP_SECTIONVIEW_STEP_REMOVERemove Section View Step
Removes all steps of a section view

Module RxUtility

HLPU_PARAMETERSConfigure Utility
Edits parameters of BaCAD Utility module
HLPU_PALETTEShow Utility palette
Shows the palette of Utility module
Initialises a symbol and executes the associated command
Initialises a layer symbol and executes the associated command
Changes the names assigned to items such as layers and dimension styles
HLPU_SYMBOL;_TText Style
Initialises a text style symbol and executes the associated command
Initialises a hatch symbol and executes the associated command
HLPU_SYMBOL_APPLYApply Symbol
Applies a symbol to entities
Applies a layer symbol to entities
HLPU_SYMBOL_APPLY;_TApply Text Style
Applies a text style symbol to entities
Applies a hatch symbol to entities
HLPU_SYMBOL_INITInitialize Symbol
Initializes a symbol determined by its unique identifier
HLPU_SYMBOL_CMDExecute Symbol Command
Executes the command of the symbol determined by its unique identifier
HLPU_BLOCK_INSERTInsert Block Symbol
Inserts the block of the symbol determined by its unique identifier
HLPU_STYLESStyles Manager
Opens styles manager window
HLPU_DIMENSIONDimension Style
Initialises a dimension style from the styles manager
HLPU_DIMENSION_APPLYApply Dimension Style
Applies a dimension style to entities
HLPU_MLEADERMLeader Style
Initialises a multileader style from the styles manager
HLPU_MLEADER_APPLYApply MLeader Style
Applies a multileader style to entities
HLPU_DRAWORDERDisplay Order
Defines the display order by entity types or layers
HLPU_DRAWORDER_APPLYApply Display Order
Applies default stored display order
HLPU_ENTITIES_MANAGEManage Entities
Changes the layer entities according to the criteria
Creates a linear dimension
Creates aligned linear dimension
Creates an angular dimension
HLPU_DIMARCArc Length
Creates an arc length dimension
Creates a radius dimension for a circle or an arc
Creates a diameter dimension for a circle or an arc
Creates linear dimensions
Creates aligned linear dimensions
Creates a main dimension on existing dimensions
Creates through dimension
HLPU_DIM_MERGEMerge Dimensions
Merges multiple dimensions in one
HLPU_DIM_DIVIDEDivide Dimension
Divides a dimension at the specified point
HLPU_DIM_REVERSEReverse Dimensions
Reverses dimensions in the opposite direction
HLPU_DIM_DINADDAdd DIN Format
Adds the DIN format to the dimensions
HLPU_DIM_DINREMOVERemove DIN Format
Removes the DIN format of the dimensions
HLPU_DIM_DINRESETReset DIN Format
Removes all DIN format overrides of the dimensions
HLPU_DIM_DINPARAMETERSConfigure DIN Format
Edits the DIN format parameters of the dimensions
HLPU_VIEWPORTModel Viewport
Creates a model viewport for the specified scale or converts existing polylines
HLPU_VIEWPORT_SELECTSelect Model Viewport
Synchronizes current scale and view with a model viewport
HLPU_VIEWPORT_EDITEdit Model Viewport
Modifies the scale of a model viewport
HLPU_VIEWPORT_PSPACEExport Model Viewport
Exports model viewports into a paper space layout
HLPU_VIEWPORT_DYNAMICLINK_ENABLETurn Model Viewport Dynamic Link On
Turns on model viewports dynamic links with paper space
HLPU_VIEWPORT_DYNAMICLINK_DISABLETurn Model Viewport Dynamic Link Off
Turns off model viewports dynamic links with paper space
HLPU_VIEWPORT_RESIZEResize Model Viewport
Resizes a model viewport
HLPU_LEVELDynamic Level
Creates a dynamic level
HLPU_LEVELDEFAULTDynamic Level
Creates a dynamic level
HLPU_LEVEL_EDITEdit Dynamic Level
Modifies a dynamic level
HLPU_LEVEL_EDITINPLACEEdit Dynamic Level Overrides In-Place
Opens an edit session in-place for the dynamic level
HLPU_LEVEL_POINT_PROPERTIESDynamic Level Point Properties
Displays the properties of a dynamic level point
HLPU_LEVEL_REMOVEOVERRRemove Overrides
Removes a dynamic level overrides
HLPU_LEVEL_SPLITSplit Dynamic Level
Splits a dynamic level into two entities
HLPU_LEVEL_MERGEMerge Dynamic Levels
Merges dynamic levels (with same reference) into a single entity
Creates a level depending on the type and properties of the selected level
Creates a cartridge in paper space
HLPU_ANNO_MAKEMake Annotative
Makes entities annotative (texts, dimensions or hatchs)
HLPU_ANNO_REMOVERemove Annotativity
Removes the annotativity to entities
HLPU_LINETYPESCALELinetype Scale
Sets linetype scale of a line by defining a value in mm/plt
HLPU_LAYER_SELECTQuick Select
Selects all entities from one or more layers
Creates a QR code
Creates a glyph

Module RxFormwork

HLPB_PARAMETERSConfigure Formwork
Edits parameters of BaCAD Formwork module
HLPB_CONCRETESTOPConcrete Stop
Creates a concrete stop polyline or converts existing polylines
HLPB_CONCRETESTOP_EDITEdit Concrete Stop
Modifies a concrete stop
Creates a rock polyline or converts existing polylines
Modifies a rock
HLPB_SHEETPILESheet Pile
Creates a sheet pile polyline or converts existing polylines
HLPB_SHEETPILE_EDITEdit Sheet Pile
Modifies a sheet pile
Creates a column
Creates an opening
HLPB_CLOTHOIDClothoïd
Creates a clothoïd
HLPB_CLOTHOID_INFOClothoïd Information
Draws information of a clothoïd (start deposit, end circle center and end tangent)
HLPB_KMCURVEKilometers Lines
Creates kilometers lines (for clothoïds, lines, arcs, polylines, splines)
HLPB_INSULATIONInsulation
Creates an insulation polyline or converts existing polylines
HLPB_INSULATION_EDITEdit Insulation
Modifies an insulation
Creates a tightness polyline or converts existing polylines
HLPB_TIGHTNESS_EDITEdit Tightness
Modifies a tightness
Creates a grading along a polyline, with or without selection of the low-grading
HLPB_GRADING_REVERSEReverse Grading
Reverses the barbules of a grading
HLPB_POINTS_IMPORTImport Points
Imports points (with their characteristics or attributes) from a file (CSV format)
HLPB_POINTS_IMPLANTLocate Points
Locates blocks with attributes and exports them to a file (CSV format)
HLPB_SECSTEELSectional Steel
Creates a sectional steel in the desired view (section, from above, from below, left ou right)
HLPB_SECSTEEL_LAYOUTAxis Grid with Profiles
Creates an axis grid lines for steel profiles
Creates axis grid lines
Creates a ground model (contour lines and triangulation)
HLPB_GROUND_SECTIONGround Section
Creates a ground section by selecting contour lines
HLPB_VOLUME_EXTRACTExtract Volumes
Exports surfaces or volumes to a file (CSV format)

Module RxRebar

HLPA_PARAMETERSConfigure Rebar
Edits parameters of BaCAD Formwork module
HLPA_PALETTE_FIELDSShow Bars palette
Shows the palette of Rebar module
HLPA_PALETTE_WELDMESHESShow Weldmesh Palette
Shows the palette of Weldmesh module
HLPA_PROJECT_CHANGEChange Project
Allows to modify the project linked to the rebar positions
Adds a label to a rebar element
HLPA_LABEL_REMOVERemove Label
Removes the labels linked to reinforcement elements
Creates one or many thresholds to align rebar labels by converting selected entities (polylines, lines, arcs, ...) or defining a rectangle with two points
Enables one or many thresholds to align rebar labels
Disables one or many thresholds to align rebar labels
Enables one or many thresholds only to align rebar labels
HLPA_LABEL_THRESHOLD_ENABLEALLEnable All Thresholds
Enables all thresholds to align rebar labels
HLPA_LABEL_THRESHOLD_DISABLEALLDisable All Thresholds
Disables all thresholds to align rebar labels
HLPA_LABEL_THRESHOLD_ALIGNLABELSAlign Labels to Threshold
Aligns rebar labels to threshold
HLPA_LABEL_AUTOAutomatic Label
Automatically adds labels to several reinforcement elements
HLPA_DIAGNOSTICDiagnostic
Launches diagnostic process for current drawing (detects eventual data integrity failure)
HLPA_LAYOUT_CHANGEChange Layouts
Allows to modify the layouts linked to the rebar positions
Migrates the reinforcement positions created with earlier than 2017 BaCAD version
HLPA_LEVEL_CHANGEChange level
Allows to modify the level linked to the rebar positions
HLPA_FIELDPlane Reinforcement
Reinforces a rectangular or parellelogram plane zone
Adds an instance of a reinforcement bar in a plane zone
Reinforces a rectangular or parallelogram plane zone with the selected bar properties
Adds a zone with similar bars to the ones of the selected zone and connect it to the selected zone
HLPA_FIELD_POLYGONPlane Any Shape
Reinforces a plane zone of any shape
Adds a helix position in a column or a stake
Adds a reinforcement bar in the selected plane zone
Places reinforcement along a trajectory by selecting an entity or picking points
Creates a set of positions and counts it several times
Places parallel or perpendicular reinforcement to the edges of an element (slab, wall, ...) or an opening as well as edges reinforcment
Places parallel or perpendicular reinforcement to the edges of an element (slab, wall, ...) or an opening
Regenarates the chaining
Edits a chaining
Reverse a chaining
Cleans a chaining
Semi-automatically reinforces an isolated foundation
Regenerates a foundation
Edits a foundation
Cleans a foundation
Creates a schema from a reinforced foundation
Creates a wall foundation
Regenerates a wall foundation
Edits a wall foundation
Cleans a wall foundation
Creates a schema from a reinforced wall foundation
Reset reinforcement
Semi-automatically reinforces a column
Regenerates a column
Edits a column
Cleans a column
Creates a schema from a reinforced column
Semi-automatically reinforces a wall
Regenerates a wall
Edits a wall
Cleans a wall
Wall Profile Top
Wall Profile Bottom
Creates a schema from a reinforced wall
Add a window
Add a separator
Copy Element
Display wall layer
Hide all wall layers
HLPA_FIELD_WALL_DISPLAY_LAYER;1Display layer vertical interior
Display layer vertical interior
HLPA_FIELD_WALL_DISPLAY_LAYER;2Display layer horizontal interior
Display layer horizontal interior
HLPA_FIELD_WALL_DISPLAY_LAYER;3Display layer horizontal exterior
Display layer horizontal exterior
HLPA_FIELD_WALL_DISPLAY_LAYER;4Display layer vertical exterior
Display layer vertical exterior
Show all elevations
Hide all elevations
Edits a zone of the wall
Align all the elevations of the wall
Semi-automatically reinforces a radial zone
Regenerates a radial zone
Edits a radial zone
Cleans a radial zone
Creates a schema from a radial zone
Semi-automatically reinforces a section profile
Add section points
Select the segments of the bar
Regenerates a section
Select a formwork segment exposure value
Pick a bar division point
Switch to the next division variant
HLPA_FIELD_SECTIONSection Reinforcement
Places reinforcement parallel or perpendicular to the cutting plane
Creates a cut-away field by selecting each bar
Adds an instance of a reinforcement bar in section
Reinforces a parallel or perpendicular to the cutting plane zone with the selected bar properties
HLPA_FIELD_SECTION_ENTITYSection Any Shape
Converts an existing polyline to a reinforcement bar
Change section depth
HLPA_FIELD_FREELabel Only
Places a reinforcement label that defines a bar without graphic representation
References the selected reinforcement bar by placing a reinforcement label without graphic representation
Connects the distribution lines having identical reinforcement bars
Removes the connection between distribution lines having identical reinforcement bars
Divides a distribution line in two
Merges distributions line
Alternates the reinforcment bars placement on the distribution line (øX s=Y becomes øX1 s=2*Y + øX2 s=2*Y) or delete the alternate placement of an alternate position
Adds a reinforcement bar on an existing distribution line
Separate all reinforcement bars on a distribution line
Removes a reinforcement bar from a distribution line containing several
Moves a reinforcement bar's distribution line
Edits a reinforcement bar's properties
Edits Rebar Field Bars
Edits Rebar Field Bars
Represents a reinforcement bar in the form of AutoCAD Polyline
Moves the reinforcement bar or the superimposed distribution line, in case of a detected superposition
Replaces the graphic representation of a bar by an AutoCAD primitive (Polyline, Line, ...)
HLPA_FIELD_RESETReset Rebar Field
Resets rebar field graphical modification
Extends a reinforcement bar or a distribution line
Shrinks a reinforcment bar or a distribution line
Cuts reinforcement bars on a point or in equal parts
HLPA_FIELD_SLOPEApply Slope
Applys a slope to plane reinforcement zones
Export reinforcement bars
Export reinforcement bars
HLPA_FIELD_SELECT_LINKEDSelect Linked Positions
Selects all linked positions of reinforcement positions
HLPA_FIELD_UNLOCKUnlocks Reinforcement Bar Field
Unlocks a reinforcement field to allow modifications
HLPA_FIELD_LOCKLock Reinforcement Bar Field
Locks a reinforcement field to avoid modifications
HLPA_FIELD_ALIGNONGRIDAlign Reinforcement Bar Field
Aligns the distribution line and the bar of a reinforcement field on the grid
HLPA_FIELD_REMOVE_DIMENSIONSRemove overlapping dimensions
Remove overlapping dimensions
Copies the properties of an existing rebar position to other positions
Copies the rebar style overrides of a position to other positions
Edits the rebar style overrides of one or several positions
Resets the rebar style overrides of one or several positions
Edits the distribution line of a reinforcement bar
Switch bar from directionnal to perpendicular and vice versa
Creates anchorages dimensions
Semi-automatically reinforces a slab or foundation
HLPA_SLAB_EDITEdit a reinforced slab
Edits a reinforced slab
HLPA_WELDMESHWelded Wire Mesh
Creates a welded wired mesh
HLPA_WELDMESH_INSTANCEWelded Wire Mesh Instance
Creates an instance of a welded wired mesh
HLPA_WELDMESHSECTIONWelded Wire Mesh Section
Creates a welded wired mesh in section
HLPA_WELDMESHSECTION_INSTANCEWelded Wire Mesh Section Instance
Creates an instance of a welded wired mesh in section
HLPA_WELDMESHSECTION_SETSection of Welded Wire Mesh
Sets the section position and cutting depth of a welded wired mesh
HLPA_WELDMESHSECTION_ENTITYWelded Wire Meshes Section on an entity
Creates a welded wired meshes in section on an entity
HLPA_WELDMESH_UNLOCKUnlock Welded Wire Mesh
Unlock a welded wired mesh to allow modifications
HLPA_WELDMESHESZONEWelded Wire Meshes Zone
Creates a zone of welded wired meshes
HLPA_WELDMESHESZONESECTIONWelded Wire Meshes Zone Section
Creates a zone of welded wired meshes in section
HLPA_WELDMESHESZONE_REGENRegen Welded Wire Meshes Zone
Regenerates a zone of welded wired meshes
HLPA_WELDMESH_CUTCut a Welded Wire Mesh
Defines the cutting of a welded wired mesh
HLPA_WELDMESH_CUT_CLEANClean Welded Wire Mesh cutouts
Removes all the cutouts of a welded wired mesh
HLPA_WELDMESH_BENDBend a Welded Wire Mesh
Defines a bending of a welded wired mesh
HLPA_WELDMESH_BEND_CLEANClean Welded Wire Mesh folds
Removes all the folds of a welded wired mesh
Copies welded wire meshes by dragging them
HLPA_SELECT_INSTANCESSelect All Instances
Selects all instances (representations) of a reinforcement position or a welded wire mesh plate
HLPA_SELECT_SIMILARSSelect Similar Positions
Selects similar positions of a reinforcement positions or a welded wire mesh plates
HLPA_WELDMESH_EDITINPLACEEdit Welded Wire Mesh Overrides In-Place
Opens an edit session in-place for the welded wire mesh

Module RxJunctionCage

HLPJ_PALETTEShow JunctionCage palette
Shows the palette of JunctionCage module
Creates a junction cage in section
Creates a junction cage in plan
Creates a junction cage and links to an existing one
Generates the print list of junction cages

Module RxOldies

HLPO_DYNLEVEL_MIGRATEMigrate Levels
Migrate old block levels to new dynamic levels
HLPO_ENTITIES_MIGRATEMigrate Entities
Migrate old entities/objects